Wood Stakes for Silt Fence
Acacia wood stakes, kiln dried, four-side planed and sanded, cut to length and tapered at one end. Supplied as stakes only for the buyer’s own assembly process; fabric and mesh are not included.
View specifications →LEFAMI • SILT FENCE
Silt Fence — Stakes and Pre-Assembled Options
LEFAMI offers two supply options: machined wood stakes only, and finished assemblies with fabric or mesh sewn/stapled to the stakes to buyer requirements.
Silt Fence — Stakes and Pre-Assembled Options
LEFAMI offers two supply options: machined wood stakes only, and finished assemblies with fabric or mesh sewn/stapled to the stakes to buyer requirements.
Request a Silt Fence quote ↗
Two supply options
Pre-Assembled Silt Fence — Fabric or Mesh
Machined acacia stakes are sewn/stapled to the specified fabric or mesh on the assembly line. Material type, height, length, attachment method, stake count and spacing for each finished bundle or roll are agreed per order.
View specifications →Specify fabric or mesh for the intended application
Fabric and mesh are distinct material configurations; equivalent filtration or sediment-retention performance is not assumed. Provide the specified material, required testing and project requirements for review before quotation.
Stake sizes and finished assembly configuration
| Item | Specification / details to agree |
|---|---|
| Rough stock before machining | 40 × 40 × 1300 mm → planed to 38 × 38 × 1300 mm → trimmed to 38 × 38 × 1220 mm. |
| Rough stock — larger size | 48 × 48 × 1300 mm → planed to 46 × 46 × 1300 mm → trimmed to 46 × 46 × 1220 mm. |
| Finished acacia stake — size 1 | 46 × 46 × 1220 mm; approximately 1.81 × 1.81 × 48.03 in. |
| Finished acacia stake — size 2 | 38 × 38 × 1220 mm; approximately 1.50 × 1.50 × 48.03 in. |
| Post-drying moisture target | Below 12%; measurement and acceptance by agreement. |
| Surface finish | Four-side planed and sanded. |
| Stake tip | One tapered end; taper length 120–130 mm. Tip profile per approved drawing. |
| Fabric / mesh and attachment | Fabric or mesh sewn/stapled to stakes; material, height, length and attachment agreed per order. |
| Bundle / roll configuration | Stake count and spacing to buyer requirements. |
| Dimensional basis | Millimetres are controlling; inch conversions are approximate. Tolerances agreed per order. |
Order-specific specifications
The dimensions below describe the factory’s current production specification; they do not establish suitability for every U.S. project. Fabric requirements, tolerances, testing, packaging, treatment records and delivery terms are agreed in the quotation and B2B contract.
Factory production process
Steam-heated kiln drying
Sawn acacia stakes enter a steam-heated kiln with a post-drying moisture target below 12%.
Four-side planing
Machine the stake cross-section to 46 × 46 mm or 38 × 38 mm.
Cross-cutting to length
Trim the stakes to a finished length of 1220 mm.
Four-side sanding
Machine-sand all four sides to the agreed surface requirements.
Tapering the stake tip
Taper one end over 120–130 mm; profile and tolerances follow the drawing.
QC and marking requirements
Inspect stakes before the next operation. HT marking and treatment records must be confirmed against batch requirements.
Fabric / mesh attachment and bundling
Fabric or mesh sewn/stapled to stakes; material, height, length and attachment agreed per order.
Wood stakes, bundling and production lines
Tapered stakes
Production material supplied by LEFAMI.
Bundled stakes
Production material supplied by LEFAMI.
Stake staging area
Production material supplied by LEFAMI.
Machined stake detail
Production material supplied by LEFAMI.
Stakes prepared for dispatch
Production material supplied by LEFAMI.
Quality inspection material
Production material supplied by LEFAMI.
Fabric attachment line
Production material supplied by LEFAMI.
Stake machining line
Production material supplied by LEFAMI.
What U.S. buyers should include in an inquiry
Send the project drawing or specification, stake dimensions, fabric height and length, stake count and spacing, fabric attachment method, bundle or roll quantities, labels, packaging, destination and required date. If testing, fabric performance or project/state specifications apply, provide the documents for feasibility review before quotation.
Heat treatment, inspection and batch records
HT denotes heat treatment, which differs from chemical fumigation. A post-drying moisture target below 12% does not by itself establish heat-treatment compliance. Applicable treatment, marking and batch-document requirements for the product and packaging are reviewed before order confirmation.
Minimum quantities and delivery schedule
Minimum order quantity is agreed for the stake size, fabric assembly, quality and packaging of each order. Lead time is confirmed after specifications, quantities and destination are agreed, and is recorded in the quotation and B2B contract.
LET’S WORK TOGETHER
Your specifications.
Our production solution.
Share your wholesale requirements to discuss production, quality and delivery terms.
SALES0375 577 228 ↗
Show Zalo QR code
Scan with Zalo to contact Ngatraco.
FACTORYThung Tay, Voi Village, An Nghia Commune, Phu Tho, Vietnam